hpux. efi is the HP-UX-specific operating system loader utility for bootstrap. It is a native efi (4) application that can be run on the Itanium-based platform. hpux. efi supports the following options: -V. Display the release and version numbers of the hpux utility.-tm.
hpux. efi (1M) hpux. efi (1M) Itanium(R)-based System Only NAME hpux. efi – HP-UX bootstrap for Itanium-based systems SYNOPSIS hpux. efi [-V] [-tm] [-vm] DESCRIPTION hpux. efi is the HP-UX-specific operating system loader utility for bootstrap. It is a native efi application that can be run on the Itanium-based platform. hpux. efi supports the following options: -V Display the.
efi (4) efi (4) Itanium(R)-Based Processor Family Only NAME efi – Extensible Firmware Interface description DESCRIPTION The EFI ( Extensible Firmware Interface ) is an interface between HP-UX and the Itanium-based platform firmware. The file system supported by the Extensible Firmware Interface is based on the FAT file system. EFI encompasses the use of FAT-32 for.
Issue HP-UX Boot Loader commands at the HPUX> prompt, or enter the EXIT command to return to the EFI Shell interface.. Refer to the help command or the hpux(1M) manpage for details.. Exit the console and service processor interfaces if finished using them. To exit the EFI environment type ^B (Control-B) this exits the nPartition console and returns to the service processor Main.
The EFI file system is based on the FAT file system and used by the Itanium-based system BIOS to locate an HP-UX bootloader. See efi (4). Without the -u option, efi _cp copies from an HP-UX file system to the EFI volume specified by devicefile in this case, the destination should be relative to the root of the EFI volume specified by devicefile.
Command Reference for EFI Shell Commands, Integrity Servers with HP-UX for Mission Critical UNIX …
Booting to the HP-UX Loader ( HPUX .EFI), Booting to the HP-UX Loader ( HPUX .EFI), hpux.efi (1M) hpux.efi (1M) NAME hpux.efi – HP-UX bootstrap for Itanium-based systems SYNOPSIS DESCRIPTION is the HP-UX -specific operating system loader utility for bootstrap. It is a native efi (4) application that can be run on the Itanium- based platform. supports the following options: Display the release and version numbers of the utility.
Table 4-3 lists the commands supported by the EFI Shell interface on cell-based HP Integrity servers.. The EFI Shell is accessible from an nPartition console when the nPartition is in an active state but has not booted an operating system.
vparenv. HP-UX shell command that allows you to set the mode (vPars or nPars) for the next reboot of the nPartition or to set the memory granularity unit size in firmware.. vparconfig. EFI command that allows you to set the mode (vPars or nPars) and forces a reboot of the nPartition.. Note that vparconfig is not a built-in EFI command you will need to go to the fsN:> disk.
IBM AIX, Solaris, Unix, Linux, OpenVMS
